Genuine Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD SB RKT4P 4TB

NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant. Power Management Support for APST / ASPM / L1.2. Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes. The Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD Extreme Performance Solid State Drive (SB-RKT4P-4TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface. Based on TLC NAND Flash memory, its performance speeds can reach up to 7100 MB/s (read) and 6600 MB/s (write) when using a PCIe Gen4 motherboard. Using a PCIe Gen3 Motherboard Speeds will reach up to 3400 MB/s (read) and 3000 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems. The Sabrent 4TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 7100 MB/s (read) and 6600 MB/s (write), significantly faster than PCIe 3.0. Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3500MB/s. When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance. The Sabrent 2TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3400 MB/s (read) and 3000 MB/s (write). Features: ?˜ NVMe M.2 PCIe Gen4 x4 Interface. ?˜ PCIe 4.0 Compliant / NVMe 1.3 Compliant. ?˜ Power Management Support for APST / ASPM / L1.2. ?˜ Supports SMART and TRIM commands. ?˜ Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. ?˜ Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. ?˜ Upgradeable Firmware. Package contents: ?˜ 4TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 SSD. ?˜ User Manual. Specification : Model Brand Sabrent Series Rocket 4 Plus Model SB-RKT4P-4TB Device Type Internal Solid State Drive (SSD) Used For Consumer Details Form Factor M.2 2280 Capacity 4TB Memory Components 3D TLC NAND Interface PCI-Express 4.0 x4 Controller Phison PS5018-E18 Performance Max Sequential Read Up to 7100 MBps Max Sequential Write Up to 6600 MBps MTBF 1,600,000 hours HeatSink No Environmental Operating Temperature 0 ?„C ~ +70 ?„C Storage Temperature -40 ?„C ~ +85 ?„C Max Shock Resistance 1500G Dimensions & Weight Height 3.60mm Width 22mm Depth 80mm