Original Sabrent 1TB Rocket Q4 NVMe PCIe Gen4 x 4 M.2 2280 Internal SSD with Heatsink SB RKTQ4 HTSS 1TB

The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD With Heatsink delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface. The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 3700 MB/s (read) and 1800 MB/s (write), significantly faster than PCIe 3.0. Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3300MB/s. The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3300 MB/s (read) and 3300 MB/s (write). When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance. This Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD comes with the Sabrent M.2 2280 SSD Rocket Heatsink preinstalled. Features: ?˜ NVMe M.2 PCIe Gen4 x4 Interface. ?˜ PCIe 4.0 Compliant / NVMe 1.3 Compliant. ?˜ Power Management Support for APST / ASPM / L1.2. ?˜ Supports SMART and TRIM commands. ?˜ Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. ?˜ Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. ?˜ Preinstalled Rocket NVMe Heatsink. ?˜ Upgradeable Firmware. Package contents: ?˜ 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 SSD with Heatsink. ?˜ User Manual. Specification : Model Brand Sabrent Series Rocket Q4 Model SB-RKTQ4-HTSS-1TB Device Type Internal Solid State Drive (SSD) Used For Consumer Details Form Factor M.2 2280 Capacity 1TB Memory Components QLC Interface PCI-Express 4.0 x4, NVMe Controller Phison PS5016-E16 Performance Max Sequential Read Up to 4700 MBps Max Sequential Write Up to 1800 MBps HeatSink Yes Features NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant. Power Management Support for APST / ASPM / L1.2. Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface. Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. Preinstalled Rocket NVMe Heatsink. Upgradeable Firmware.